BMC1370S-0523
TAT
BMC1370S-0523
| Style: | |
|---|---|
| Rated Voltage: | |
| Operating Voltage: | |
| Rated Current: | |
| Sound Output at 10cm: | |
| Resonant Frequency: | |
| Operating Temperature: | |
| Availability: | |
| Quantity: | |
Built-In Oscillator — SMD, DC Power, Instant Sound — reflow onto the board, feed 5 V DC, and it beeps continuously; no firmware or external drive.
Standard 13.0*13.0mm SMD Package — common square footprint; fits automatic pick-and-place feeders.
Gray PPS Housing, Reflow-Compatible — heat-resistant PPS survives lead-free reflow for real SMT production.
≥85 dB Continuous Tone at 5 V — clearly audible alarm/status beep in panels and equipment.
Only 30 mA — low-current drive from standard 5 V logic rails.
2400 Hz Warm Magnetic Tone — clear, non-harsh alert sound.
Sealed Back Label — dust/moisture resistant; 1.5 g.
RoHS Compliant, -20 °C ~ +70 °C Operation.
Parameter | Specification |
|---|---|
Brand | TAT |
Model | BMC1370S-0523 |
Buzzer Type | SMD Active Electromagnetic Buzzer (built-in oscillator) |
Rated Voltage | 5 VDC |
Operating Voltage | 4 – 6 VDC |
Rated Current | ≤ 30 mA at 5 VDC |
Sound Output (SPL) | ≥ 85 dB at 10 cm, at 5 VDC |
Resonant Frequency | 2400 ± 300 Hz |
Tone | Continuous |
Body Size | 13.0* 13.0* 7.0 ± 0.3 mm |
Sound Hole | Φ2.0 mm on top |
Mounting | SMD soldering pads (0.6 ± 0.2 / 0.5 ± 0.2 mm) |
Back | Sealed label |
Housing Material | Gray PPS (reflow-compatible) |
Net Weight | Approx. 1.5 g |
Operating Temperature | -20 °C ~ +70 °C |
Storage Temperature | -30 °C ~ +80 °C |
Tolerance | ±0.5 mm unless specified |
Certification | RoHS Compliant |
Origin | China (Guangdong) |
Security — door access, smoke detectors, smart locks, door alarms
Industrial Control — PLC fault alarms, control-cabinet beepers
Telecom & Network — routers, switches, ONT alert beepers
Smart Appliances — microwave ovens, rice cookers, washer alerts
Medical — patient monitors, portable diagnostic equipment
Office Equipment — printers, scanners, projector warnings
SMD + Active = Simplest Loud Beep — reflow it, wire 5 V, done; no drive design.
Built for Automated Lines — PPS housing and standard square pads pass reflow; tape & reel for high volume.
85 dB Where It Counts — clearly audible in panels and equipment rooms.
Low Current 30 mA — easy on 5 V logic supplies.
OEM Flexibility — intermittent tone, alternate frequencies and custom reel quantities available.
Q1: Active or passive? Active. It has a built-in oscillator circuit. Apply DC voltage (4–6 V) and it sounds — no PWM or external frequency.
Q2: Is it SMD or through-hole? SMD. It has surface-mount pads on the bottom and reflow-compatible gray PPS housing; ship tape & reel.
Q3: How do I connect it? Solder the two SMD pads to your 5 V supply (plus/minus). Use a switch, transistor or GPIO to turn it on/off.
Q4: How loud is 85 dB? At 5 V measured 10 cm away, 85 dB is a clear indoor alert — typical for panels and instruments.
Q5: Continuous or intermittent? Standard is continuous tone. Intermittent (pulse) versions are available on request.
Q6: Can it survive reflow? Yes. The gray PPS housing is rated for lead-free reflow; follow the JEDEC J-STD-020 curve in the datasheet.