BM9025S-0327-16
TAT
BM9025S-0327-16
| Style: | |
|---|---|
| Rated Voltage: | |
| Operating Voltage: | |
| Rated Current: | |
| Sound Output at 10cm: | |
| Coil Resistance: | |
| Resonant Frequency: | |
| Availability: | |
| Quantity: | |
2.5 mm Ultra-Thin Profile — nearly half the thickness of standard 4–5 mm SMD buzzers; fits TWS lids, watches and slim enclosures.
True SMD for Pick-and-Place — two tin-plated brass soldering pads mate with standard SMT feeders; LCP housing survives lead-free reflow.
Low-Voltage 2–4 Vo-p Drive — direct drive from a 3 V MCU GPIO or coin cell; no boost circuit.
16 Ω Coil, Easy to Drive — 90 mA peak at 3 Vo-p; a small NPN transistor or GPIO drives it to full 85 dB.
≥85 dB SPL at 10 cm (3 Vo-p) — clear, audible alert in a 9 mm / 2.5 mm footprint.
2731 Hz Warm Magnetic Tone — softer than a high-pitched piezo; comfortable for wearables and remotes.
Black LCP Housing, 0.5 g — heat-resistant and near-weightless; tape & reel for high-volume SMT.
RoHS Compliant, -20 °C ~ +70 °C.
Parameter | Specification |
|---|---|
Brand | TAT |
Model | BM9025S-0327-16 |
Buzzer Type | SMD Passive Electromagnetic (Magnetic) Buzzer |
Rated Voltage | 3.0 Vo-p |
Operating Voltage | 2 – 4 Vo-p |
Rated Current | ≤ 90 mA at 2731 Hz, 50% duty square wave, 3 Vo-p |
Sound Output (SPL) | ≥ 85 dB at 10 cm, at 2731 Hz 50% duty, 3 Vo-p |
Coil Resistance | 16 ± 3 Ω |
Resonant Frequency | 2731 Hz |
Body Diameter | Φ9 mm |
Body Height | 2.5 mm |
Sound Port | Top outlet, 0.5 ± 0.05 mm |
Mounting | SMD, 2 soldering pads, tin-plated brass |
Housing Material | Black LCP (reflow-compatible) |
Net Weight | Approx. 0.5 g |
Operating Temperature | -20 °C ~ +70 °C |
Storage Temperature | -30 °C ~ +80 °C |
Tolerance | ±0.3 mm unless specified |
Certification | RoHS Compliant |
Origin | China (Guangdong) |
Hearables & Wearables — TWS earbud charging cases, smartwatches, fitness bands
Remote Controls — TV/set-top-box remotes, Bluetooth voice remotes, presentation clickers
Medical Wearables — temperature patches, pulse oximeters, glucose meters
Smart Home — doorbells, smart locks, touch switches, alarm buttons
Low-Power IoT — battery sensor nodes, beacon tags, asset trackers
Toys & Novelties — greeting cards, mini voice modules, educational flashcards
Thinnest Magnetic Buzzer for TWS/Watches — 2.5 mm profile opens ultra-slim designs impossible with 5+ mm buzzers.
Built for Real SMT Lines — LCP housing and tin pads pass lead-free reflow; tape & reel for automatic placement.
Runs on 3 V Straight from GPIO — 2–4 Vo-p range and 16 Ω coil simplify drive in battery products.
Warm, Non-Harsh Tone — 2.7 kHz magnetic output suits user-facing wearables and remotes.
Full OEM/ODM Flexibility — alternate frequencies, pad layouts and custom reel quantities available.
Q1: Active or passive? Passive SMD magnetic. Feed a square wave at 2731 Hz (≈50% duty) from an MCU PWM pin; DC voltage alone makes no sound.
Q2: Can it survive reflow soldering? Yes. The black LCP housing is rated for lead-free reflow; follow the JEDEC J-STD-020 curve in the datasheet.
Q3: How do I drive it from a 3 V MCU? Connect one pad to a GPIO PWM output (2.7 kHz square wave) and the other to GND. The 16 Ω coil draws ~90 mA peak; use a small NPN/MOSFET for cleaner drive.
Q4: How loud is 85 dB? At 3 Vo-p measured 10 cm away, 85 dB is a clear indoor alert — suited to handheld and wearable devices held near the user.
Q5: Do you supply tape & reel? Yes. Volume orders ship tape & reel, ESD-shielded and moisture-bagged for SMT feeders.
Q6: Can I get a wire-lead version? Yes. Standard is SMD pads; wire-lead and JST connector variants are available on request.