BMC9040-0327
TAT
BMC9040-0327
| Style: | |
|---|---|
| Rated Voltage: | |
| Operating Voltage: | |
| Resonant Frequency: | |
| Tone: | |
| Rated Current: | |
| Sound Output at 10cm: | |
| Availability: | |
| Quantity: | |
Built-In Oscillator — DC Power, Instant Sound — connect DC and it beeps continuously; no firmware or external frequency.
3 V Rated, 2–5 V Wide Range — runs from coin cells, 1.5 V single cells, 3 V and 5 V logic; no boost circuit.
80 dB Continuous Tone at 3 V — clearly audible indoor alert from a low-voltage source.
Slim Φ9.2*4.2 mm, 1.0 g — fits toys, remotes and compact electronics.
Only 30 mA — low-current drive, battery-friendly.
2700 Hz Warm Magnetic Tone — soft, non-harsh reminder sound.
Black PBT Housing, Potted Top — dust/moisture resistant; 2-pin through-hole, 5 mm pitch.
RoHS Compliant, -20 °C ~ +70 °C Operation.
Parameter | Specification |
|---|---|
Brand | TAT |
Model | BMC9040-0327 |
Buzzer Type | Active Electromagnetic Buzzer (built-in oscillating circuit) |
Rated Voltage | 3 VDC |
Operating Voltage | 2 – 5 VDC |
Rated Current | ≤ 30 mA at 3 VDC |
Sound Output (SPL) | ≥ 80 dB at 10 cm, at 3 VDC |
Resonant Frequency | 2700 ± 300 Hz |
Tone | Continuous |
Body Diameter | Φ9.2 ± 0.2 mm |
Body Height | 4.2 mm |
Sound Hole | Φ1.8 mm on potted top |
Mounting | Through-hole pins; Φ0.6 ± 0.1 mm; L1 = 4.0 ± 0.5, L2 = 5.5 ± 0.5 mm; pitch 5 ± 0.2 mm |
Housing Material | Black PBT |
Net Weight | Approx. 1.0 g |
Operating Temperature | -20 °C ~ +70 °C |
Storage Temperature | -30 °C ~ +80 °C |
Tolerance | ±0.5 mm unless specified |
Certification | RoHS Compliant |
Origin | China |
Toys & Novelties — greeting cards, mini voice modules, educational kits
Remote Controls — TV/set-top-box remotes, Bluetooth voice remotes
Home Appliances — microwave ovens, rice cookers, washer beeps
Instruments & Timers — temperature controllers, timers, scales
Security — doorbells, smart locks, door-access beepers
Battery-Powered Devices — coin-cell and single-battery alert products
Runs on a Coin Cell — 3 V rated, 2–5 V range means no boost circuit in battery designs.
Simplest Beep — two wires to DC = sound; no firmware or driver.
Thin 4.2 mm Package — fits slim toys and remotes.
Low Power 30 mA — easy on battery supplies.
OEM Flexibility — intermittent tone, longer pins and wire-lead versions available.
Q1: Active or passive? Active. It has a built-in oscillating circuit. Apply DC voltage (2–5 V) and it sounds — no PWM needed.
Q2: Can it run on a coin cell? Yes. Rated 3 VDC, operating 2–5 VDC — CR2032 and similar coin cells drive it to 80 dB.
Q3: How do I connect it? Connect the two pins to a DC supply (plus/minus per marking). Use a switch or transistor to turn it on/off.
Q4: How loud is 80 dB? At 3 V measured 10 cm away, 80 dB is a clear indoor alert — typical for toys, timers and appliances.
Q5: Continuous or intermittent? Standard is continuous tone. Intermittent (pulse) versions are available on request.
Q6: Can I get wire leads? Yes. Standard is pins; wire-lead and JST connector versions are available on request.