BM9050-0327-16
TAT
BM9050-0327-16
| Style: | |
|---|---|
| Rated Voltage: | |
| Operating Voltage: | |
| Rated Current: | |
| Sound Output at 10cm: | |
| Coil Resistance: | |
| Resonant Frequency: | |
| Availability: | |
| Quantity: | |
Tiny Φ9 × 5 mm Footprint, 0.8 g — half the size of 16 mm magnetic buzzers; fits inside remote controls, TWS lids, watches and toys where larger buzzers cannot go.
Low-Voltage 2–4 Vo-p Drive — direct drive from a 3 V MCU GPIO or coin cell; no charge pump, no step-up transformer needed.
16 Ω Low-Impedance Coil — easy to drive; a single NPN transistor or GPIO outputs enough current (80 mA max at 3 Vp-p) for full volume.
≥85 dB SPL at 10 cm (3 Vo-p) — loud for its size; clearly audible indoor alert for handheld and personal electronics.
2700 Hz Warm Magnetic Tone — softer and more natural-sounding than a high-pitched piezo beep; ideal for repeated user feedback on toys, appliances and remotes.
Through-Hole Pins, 4.0 mm Spacing — two Φ0.6 mm pins, 5 mm long, fit standard compact PCB footprints; wave-solder and hand-solder friendly.
Black PPO Housing — heat-resistant through soldering; RoHS compliant, -20 °C to +70 °C operation.
Parameter | Specification |
|---|---|
Brand | TAT |
Model | BM9050-0327-16 |
Buzzer Type | Passive Electromagnetic (Magnetic) Buzzer |
Rated Voltage | 3 Vo-p |
Operating Voltage | 2 – 4 Vo-p |
Rated Current | ≤ 80 mA at 2700 Hz, 50% duty square wave, 3 Vo-p |
Sound Output (SPL) | ≥ 85 dB at 10 cm, at 2700 Hz 50% duty, 3 Vo-p |
Coil Resistance | 16 ± 4 Ω |
Resonant Frequency | 2700 Hz |
Body Diameter | Φ9.0 ± 0.2 mm |
Body Height | 5.0 mm |
Mounting | Through-hole pins; 2 * Φ0.6 ± 0.05 mm; pin length 5 mm; spacing 4.0 mm |
Sound Port | Top-center sound hole |
Housing Material | Black PPO |
Net Weight | Approx. 0.8 g |
Operating Temperature | -20 °C ~ +70 °C |
Storage Temperature | -30 °C ~ +80 °C |
Tolerance | ±0.5 mm unless specified |
Certification | RoHS Compliant |
Origin | China (Guangdong) |
Measured at 25±3 °C, 60±10% RH, atmospheric pressure 860–1060 hPa.
Remote Controls — TV/set-top-box remotes, Bluetooth voice remotes, presentation clickers, car key fobs
Hearables & Wearables — TWS charging cases, smartwatches, fitness bands, smart rings
Toys & Novelties — electronic keyboards, quiz buzzers, greeting cards, talking plush toys
Small Appliances — microwave ovens, rice cookers, mini oven timer beepers
Medical Portable — glucose meters, blood pressure monitors, thermometers
Smart Home — doorbells, smart locks, touch switches, alarm buttons
Low-Power IoT — battery sensor nodes, beacon tags, asset trackers
Fits the Tightest Spaces — 9 mm diameter and 5 mm height open designs impossible with 12/16 mm buzzers.
Runs on 3 V Straight from GPIO — 2–4 Vo-p range and 16 Ω coil let a microcontroller pin drive it directly; no external driver circuitry.
Warm Tone, Not a Harsh Beep — 2700 Hz magnetic output sounds pleasant for user-facing products like toys and remotes.
Loud for 9 mm — 85 dB at 3 Vp-p punches above its weight class for indoor handheld use.
Full OEM/ODM Flexibility — alternate frequencies, pin lengths, wire-lead and connector versions available.
Q1: Active or passive? Passive magnetic. Feed a square wave at 2700 Hz (≈50% duty) from an MCU PWM pin; DC voltage alone makes no sound.
Q2: How do I drive it from a 3 V MCU? Connect one pin to a GPIO PWM output (2.7 kHz square wave) and the other to GND. The 16 Ω coil draws ~80 mA peak; for louder or cleaner drive use a small NPN/MOSFET transistor stage.
Q3: Can I run it from a coin cell? Yes — the 2–4 Vo-p range covers 3 V coin-cell and small-battery operation; current draw is short and low-duty.
Q4: How loud is 85 dB? At 10 cm, 85 dB is a clear indoor alert — comparable to an alarm clock or clear notice, suited to handheld and personal devices held near the user.
Q5: How does it compare to a 9 mm piezo buzzer? Magnetic = warmer 2.7 kHz tone, lower drive voltage, 16 Ω coil; piezo = higher 4 kHz tone, capacitive, lower current but harsher sound. Choose magnetic for softer feedback, piezo for sharp alarms.
Q6: Can I get wire leads instead of pins? Yes. Standard is through-hole pins; wire-lead and JST connector variants are available on request.