BM9650E-0127-5.5
TAT
BM9650E-0127-5.5
| Style: | |
|---|---|
| Operating Voltage: | |
| Rated Current: | |
| Sound Output at 10cm: | |
| Coil Resistance: | |
| Resonant Frequency: | |
| Net Weight: | |
| Availability: | |
| Quantity: | |
1.5 Vo-p Ultra-Low Drive — runs directly from a coin cell or single 1.5 V battery; no step-up transformer or boost IC needed.
90 dB at Only 1.5 V — exceptional efficiency for its size; a tiny voltage source already produces a loud, clearly audible alert.
5.5 Ω Low-Impedance Ferrite Coil — 80 mA peak at rated voltage; a small NPN transistor or even a GPIO drives it to full volume.
Φ9.6 * 5 mm Compact, Potted — tiny body with top potting seals out dust and moisture for outdoor/bike use.
2731 Hz Warm Magnetic Tone — clear, non-harsh reminder sound for user-facing devices.
Through-Hole Pins, 5 mm Spacing — two Φ0.6 mm pins, 3.0 mm long, on a small PCB footprint.
Black PBT Housing, -20 °C ~ +70 °C; RoHS compliant.
Parameter | Specification |
|---|---|
Brand | TAT |
Model | BM9650E-0127-5.5 |
Buzzer Type | Passive Electromagnetic (Magnetic) Buzzer, Without Circuit |
Rated Voltage | 1.5 Vo-p |
Operating Voltage | 1 – 3 Vo-p |
Rated Current | ≤ 80 mA at 2.731 kHz, 50% duty square wave, 1.5 Vo-p |
Sound Output (SPL) | ≥ 90 dB at 10 cm, at 2.731 kHz 50% duty, 1.5 Vo-p |
Coil Resistance | 5.5 ± 1 Ω |
Resonant Frequency | 2731 Hz |
Body Diameter | Φ9.6 ± 0.2 mm |
Body Height | 5.0 mm |
Top | Potted seal |
Mounting | Through-hole pins; L1 = 3.0 ± 0.5 mm; Φ0.6 ± 0.1 mm; spacing 5 ± 0.2 mm |
Housing Material | Black PBT |
Net Weight | Approx. 1.5 g |
Operating Temperature | -20 °C ~ +70 °C |
Storage Temperature | -30 °C ~ +80 °C |
Tolerance | ±0.5 mm unless specified |
Certification | RoHS Compliant |
Origin | China |
Bike & Mobility — bicycle e-bike alarms, motorcycle/motophone reminders, anti-theft buzzers
Coin-Cell Devices — electronic greeting cards, key fobs, tire-pressure monitors, tiny toys
Medical Portable — glucose meters, thermometers, blood pressure monitors
Wearables & Hearables — TWS charging cases, smartwatches, fitness bands
Small Appliances — microwave oven, rice cooker, washer reminder beeps
Smart Home — doorbells, smart locks, touch switches, alarm buttons
Runs on a Coin Cell — 1.5 V rated drive means no boost circuit, simpler BOM and longer battery life in low-voltage products.
Loud at Tiny Voltage — 90 dB from 1.5 V is unusually efficient; small batteries still deliver an unmistakable alert.
5.5 Ω Coil Is Easy to Drive — low impedance pairs with cheap transistors for reliable actuation.
Potted for Outdoor/Bike Use — sealed top resists dust and moisture on bikes and portable gear.
Full OEM/ODM Flexibility — alternate frequencies, pin lengths, wire-lead/connector versions available.
Q1: Active or passive? Passive magnetic (without circuit). Feed a square wave at 2731 Hz (≈50% duty) from an MCU PWM or oscillator; DC voltage alone makes no sound.
Q2: Can it really run on 1.5 V? Yes — rated 1.5 Vo-p, operating 1–3 Vo-p. A single coin cell or 1.5 V battery directly drives it to 90 dB without a boost converter.
Q3: How do I drive it? Connect one pin to a square-wave drive (2.7 kHz) and the other to ground. The 5.5 Ω coil draws ~80 mA peak; a small NPN/MOSFET or GPIO can drive it.
Q4: How loud is 90 dB? At 1.5 V measured 10 cm away, 90 dB is a loud, clear alert — clearly audible on a bike or in a room.
Q5: Is it sealed for outdoor use? The top is potted with epoxy, giving dust/moisture resistance; add an acoustic mesh gasket for full waterproofing.
Q6: Can I get wire leads instead of pins? Yes. Standard is through-hole pins; wire-lead and JST connector versions are available on request.