TATSP32A-001
TAT
TATSP32A-001
| Dimension: | |
|---|---|
| Sound Pressure Level(dB): | |
| Impedance(Ω): | |
| Input Power (W): | |
| Resonance Frequency fo (Hz): | |
| Frequency Range (Hz): | |
| Operating Temperature (℃): | |
| Availability: | |
| Quantity: | |
96 dB Ultra-High Sensitivity (2 V / 0.1 m) — among the most efficient 32 mm speakers available; small amps reach loud volume without draining batteries.
Ultra-Slim 5 mm Profile — half the thickness of conventional 32 mm speakers; fits car mini boxes, shallow dash enclosures and flat Bluetooth speakers.
8 Ω ±15% / 1 W Rated (1.5 W Max) — standard impedance matching car head units, Bluetooth modules and mobile codecs.
F0 550 Hz, Vocal-Tuned Response — measured across 0.8–1.5 kHz for clear, natural voice; warmer than typical thin-film speakers.
Frequency Range F0 – 5 kHz — covers voice and announcement band; distortion held below 10% at 1 kHz.
Solder-Pad Connection — no loose leads; side pads solder directly to PCB or wires for a compact, reliable build.
No Buzz or Rattle — tested at 2.83 V sine wave across 200 Hz – 5 kHz for clean output.
RoHS Compliant, -20 °C ~ +60 °C Operation.
Parameter | Specification |
|---|---|
Brand | TAT |
Model | TATSP32A-001 |
Speaker Type | Mylar (thin-film) Dynamic Speaker, Round |
Rated Impedance | 8.0 Ω ± 15% |
Rated Input Power | 1.0 W |
Max Input Power | 1.5 W |
Sensitivity (SPL) | 96 dB (2 V / 0.1 m) ± 3 dB, averaged at 0.8 / 1.0 / 1.2 / 1.5 kHz |
Resonance Frequency (F0) | 550 ± 20% Hz at 1 V |
Frequency Range | F0 – 5 kHz |
Harmonic Distortion | < 10% at 1 kHz, 0.1 W input |
Buzz & Rattle | Inaudible at 2.83 V sine wave, 200 Hz – 5 kHz |
Outer Diameter | Φ32 ± 0.2 mm |
Overall Height | 5.0 ± 0.3 mm |
Center Opening | Φ16 mm |
Magnet Section | 2.4 ± 0.2 mm |
Basket/Diaphragm | 1.3 ± 0.3 mm |
Connection | Side solder pads (no leads) |
Polarity | (+) terminal pushes diaphragm forward |
Net Weight | 8.2 g |
Operating Temperature | -20 °C ~ +60 °C |
Storage Temperature | -30 °C ~ +70 °C |
Tolerance | ±0.5 mm unless specified |
Certification | RoHS Compliant |
Origin | China (Guangdong) |
Car Audio — mini speaker boxes, dash panels, navigator voice, car radio upgrades
Portable Audio — Bluetooth mini speakers, pocket voice players, FM radios
Voice & Announcement — smart speakers, navigators, intercoms, public-info boxes
Phones & Communication — senior phones, walkie-talkie speakers, intercom units
Commercial — POS voice, queue callers, digital signage announcements
Medical & Desktop — monitor prompts, desktop device voice alerts
96 dB from 2 V — exceptional sensitivity lets tiny Class-D amps play loud, saving battery and amplifier cost.
Thin Where Space Is Zero — 5 mm thickness opens shallow car and flat-enclosure designs impossible with 10+ mm speakers.
Voice-Friendly Tuning — F0 550 Hz and 0.8–1.5 kHz weighting make TTS and call audio sound full and intelligible.
Solder-Pad Simplicity — no leads to strain; pads mount cleanly on compact boards.
Full OEM/ODM Flexibility — 4 Ω / 12 Ω / 16 Ω options, wire or connector variants available.
Q1: Is this 8 Ω or 12 Ω? The TATSP32A-001 is 8 Ω ±15% per factory datasheet. We also produce 12 Ω / 16 Ω versions — specify your impedance when ordering.
Q2: How loud is 96 dB? At just 2 V measured 10 cm away, 96 dB is already a loud, clear output — high efficiency means even a small module plays at useful volume.
Q3: How do I connect it? The speaker has side solder pads; solder wires directly to the pads or mount on a small PCB. No pre-attached leads.
Q4: Can it play music? It is optimized for voice, navigation prompts and short audio (F0–5 kHz). It handles vocals and announcements well, but is not a full-range hi-fi driver.
Q5: What amplifier works? Any 8 Ω amp rated 1–1.5 W: PAM8303, NS4150, MAX98357A, or built-in amps in Bluetooth/car modules.
Q6: Do I need a sealed chamber? Yes. For best F0 and SPL, design a rear chamber of several cm³ behind the speaker; open-backed installation reduces bass.