EM6050P
TAT
EM6050P
| Model No: | |
|---|---|
| Sensitivity: | |
| Impedance: | |
| Directivity: | |
| Current Consumption: | |
| Standard Operating Voltage: | |
| S/N Ratio: | |
| Availability: | |
| Quantity: | |
6050 Tall Can, Φ6*5.0 mm — larger chamber than 6027 for fuller voice pickup.
Omnidirectional Pickup — 360° sound capture; no aiming needed.
2 V / 0.5 mA Ultra-Low Power — long battery life in wireless and portable products.
High S/N >58 dB — clean, low-noise voice for calls and recording.
Impedance < 2.2 kΩ — standard ECM output for codec/amplifier input.
Three Sensitivity Options — -46 ±3 / -44 ±3 / -42 ±3 dB (1 kHz, 0 dB = 1 V/Pa).
Two Terminations — M6050P through-hole pins / M6050A solder pads.
Metal Shield Can — blocks RF/EMI interference.
Parameter | Specification |
|---|---|
Brand | TAT |
Model | EM6050P (M6050 series) |
Type | Electret Condenser Microphone (ECM), Metal Shield |
Size | Φ6.0 ± 0.2 * 5.0 mm (6050) |
Directivity | Omnidirectional |
Standard Operating Voltage | 2 V |
Current Consumption | Max. 0.5 mA |
Impedance | < 2.2 kΩ |
Sensitivity (1 kHz, 0 dB = 1 V/Pa) | -46 ±3 dB / -44 ±3 dB / -42 ±3 dB (selectable) |
Sensitivity Reduction | Within 3 dB at 1.5 V |
Signal-to-Noise Ratio | > 58 dB |
Termination | M6050P through-hole pins / M6050A solder pads |
Origin | China |
Headsets & Intercoms — Bluetooth headsets, two-way radios, call centers
Wireless Audio — lavalier mics, wireless microphones
Voice Products — smart speakers, voice assistants, intercoms
Recording & Imaging — voice recorders, action cameras, webcams
In-Car — hands-free car kits, dashcams
Smart Home & Wearables — voice-controlled devices, smartwatches
Tall 6050 Chamber — bigger internal volume for fuller, more natural voice.
Clean Voice, Low Noise — >58 dB S/N keeps call audio clear.
Battery-Friendly — 2 V at 0.5 mA extends talk/standby time.
Pick Your Sensitivity & Termination — three sensitivities and pin/pad versions.
Metal Shield — reliable in RF-prone wireless designs.
Q1: What does "6050" mean? Standard ECM size: Φ6.0 mm diameter * 5.0 mm height — a taller can than 6027.
Q2: Omnidirectional? Yes. It picks up sound from all directions (360°).
Q3: What voltage does it need? Standard 2 V, current ≤0.5 mA. Works down to 1.5 V with <3 dB sensitivity loss.
Q4: How do I bias it? Feed 2 V through a bias resistor (typically 2.2 kΩ–2.7 kΩ); audio couples out via a capacitor to your codec.
Q5: Pins or pads? M6050P has through-hole pins; M6050A has solder pads. Specify at order.
Q6: Which sensitivity should I choose? -46 dB for close-mic headset use; -44 / -42 dB for more distant or low-gain designs. Contact us for a recommended value.